
12V 120A Alternator ALB0270GB for BMW 12317519618
Applicable models:BMW
Reference part number:0124515105,12317519618,12317519620,115677 0124515105,0986046170,ALB0270GB,ALB0270US 0986046177.1986A01176,ALB0270RB, CA1826IR,ALB0270,ALB0270BA ALB0270WA
| Rated output : | 12V, 120A |
| Pulley : | 6PK |
| Size : | |
| Weight : | Net weight: 6.8kg |
| Packaging : | Neutral kraft paper packaging |
| Spot/Pre sale : | Spot goods |
| Warranty : | 1 year |
| Product number : |
| Type : | Alternator |
| Specification : | 12V, 120A |
| Pulley : | 6PK |
| Brand : | NUOJIN |
| Number : | 12317519618 |
| Quality : | NEW |
| Delivery time : | 30 days |







Overview of the ALB0270GB Alternator
This ALB0270GB alternator is the 12V, 120A replacement for BMW 12317519618 applications. The housing, pivot points and B+ terminal follow the original design, which means the unit drops into the existing bracket and reuses the factory belt.
Charging output depends on rotational speed and on the electrical load. A unit that produces 14.2V at idle with the lights off can still be marginal when the fan, lights and rear demister are all running, which is why a load test matters more than a no-load voltage reading.
Specifications at a Glance
- Rated voltage: 12V
- Rated output: 120 A
- Pulley: 6-groove PK
- Regulator: integrated, machine sensed
- Application: BMW 12317519618
- Net weight: approximately 6.8 kg
- Condition: new, direct replacement for the original unit
The 12V, 120A rating is the output the unit holds at normal engine speed with the battery in a partially discharged state — the condition that matters in real use, not on a test bench.
Reference Numbers and Cross References
The OEM and aftermarket references listed for this alternator are:
- 12317519618
- 0124515105
- 12317519620
- 115677
- 0986046170
- ALB0270GB
- ALB0270US
- 0986046177.1986A01176
- ALB0270RB
- CA1826IR
- ALB0270
- ALB0270BA
- ALB0270WA
Several numbers in this list refer to the complete assembly while others cover the bare machine. A photograph of the rear cover protects against the most common ordering error. This unit is listed with 13 references in total.
Matching the Unit to the Vehicle
This alternator family was fitted across a range of BMW applications as engines and electrical loads were revised. The unit here covers the references above and is a direct replacement where those numbers match.
If the number on the old alternator falls outside the list above, send the engine code and a photograph of the rear cover before ordering. A unit with the right housing but a different regulator plug will not connect cleanly.
How This Alternator Fails
The diode rectifier is usually the first casualty. Six diodes convert the AC output to DC, and when one fails the alternator still charges but with a ripple that upsets the battery and the vehicle electronics.
Bearings carry the rotor at engine speed for the life of the vehicle. Once the front bearing dries out, the unit starts to whine, and the noise gets worse with electrical load rather than with engine speed alone.
Signs of a Failing Alternator
- Battery light on with the engine running
- Dim or pulsing interior lights
- Voltage at the battery below 13.5V with the engine idling
- Belt squeal that appears when a heavy load switches on
- Overheating alternator body after a short run
A load test separates a tired alternator from a tired battery. Switch on the lights, blower and rear demister and watch the voltage: a healthy unit holds its output, a worn one sags.
What to Check Before Fitting
- Battery state of charge and age
- Condition of the B+ cable and its fuse
- Pulley type: solid, clutch or overrunning
- Mounting ear dimensions against the bracket
- Belt routing after the new unit is fitted
A new alternator on a tired battery or a glazed belt will not restore charging. Test the simple items before the unit goes on.
Fitting the Replacement
With the battery isolated, relieve the belt tension, disconnect the B+ terminal and unplug the regulator connector, then remove the mounting bolts and lift the unit out.
Fit the replacement, reconnect the plug and B+ cable, then refit the belt and set tension to specification. Start the engine and confirm charging voltage at idle before the first drive.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Hejian Nuojin Auto Parts Co., Ltd. produces starter and alternator components for the aftermarket. Each alternator is tested for output at idle and rated speed, ripple current, regulator voltage and bearing noise before packing.
Standard references are kept as spot goods, volume orders are delivered in around 30 days and each alternator carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Does the alternator come with a pulley?
Yes, the unit is supplied with its pulley fitted as shown in the photographs, so the original belt can be reused.
What charging voltage should I see?
Around 13.8 to 14.7V at idle on a 12V system, and about 27.5 to 28.5V on a 24V system, measured at the battery posts.
Can a bad alternator damage the battery?
Overcharging or heavy ripple will shorten battery life, and a deeply discharged battery can fail. Replace the alternator before the battery if voltage is out of range.
Can I replace the regulator only?
Yes, when the bearings and diodes are sound. On a high-mileage unit the complete alternator is usually better value.

