
12V 90A Alternator 1516463R for Audi
Applicable models:Audi
Reference part number:112043,437513,2542244,9517219,0124325004,074903025K,074903025KX 0986041230,1516463R,4123,074 903 025 K,8EL012428071,8EL737607001,BBA2176 BRB1230, LRAO1710, LRA1710, 0 124 325004,
| Rated output : | 12V, 90A |
| Pulley : | 6PK |
| Size : | |
| Weight : | Net weight: 5.25kg |
| Packaging : | Neutral kraft paper packaging |
| Spot/Pre sale : | Spot goods |
| Warranty : | 1 year |
| Product number : |
| Type : | Alternator |
| Specification : | 12V, 90A |
| Pulley : | 6PK |
| Brand : | NUOJIN |
| Number : | 0124325004 |
| Quality : | new |
| Delivery time : | 30 days |







Overview of the 1516463R Alternator
This 1516463R alternator is the 12V, 90A replacement for Audi applications. The housing, pivot points and B+ terminal follow the original design, which means the unit drops into the existing bracket and reuses the factory belt.
An alternator spends its life at engine speed, so bearings, slip rings and diodes wear continuously rather than in bursts. That is why output falls gradually and why the first symptom is often a battery that is flat only after a few days of short trips.
Electrical Specification
- Rated voltage: 12V
- Rated output: 90 A
- Pulley: 6-groove PK
- Regulator: integrated, machine sensed
- Application: Audi
- Net weight: approximately 5.25 kg
- Condition: new, direct replacement for the original unit
The 12V, 90A rating is the output the unit holds at normal engine speed with the battery in a partially discharged state — the condition that matters in real use, not on a test bench.
Reference Numbers and Cross References
The alternator is supplied against the following references, which help identify it against the unit already fitted to the vehicle:
- 0124325004
- 437513
- 2542244
- 9517219
- 0986041230
- 1516463R
- 8EL012428071
- 8EL737607001
- BBA2176
- BRB1230
- LRAO1710
- LRA1710
- 325004
Where the label on the old unit has faded, compare the pulley groove count, the mounting ears and the plug shape with the photographs before ordering. This unit is listed with 13 references in total.
Where This Alternator Fits
This alternator family was fitted across a range of Audi applications as engines and electrical loads were revised. The unit here covers the references above and is a direct replacement where those numbers match.
Vehicles that have had an engine or accessory drive belt conversion may already carry a different alternator, so treat the catalogue as a starting point rather than the final answer.
What Wears Out First
Bearings carry the rotor at engine speed for the life of the vehicle. Once the front bearing dries out, the unit starts to whine, and the noise gets worse with electrical load rather than with engine speed alone.
Oil mist from a leaking cam or crank seal attacks the internal insulation. A unit that is oily on the outside is often already failing inside, even if the output still looks normal on a meter.
Fault Symptoms
- Battery warning lamp glowing at idle and fading at speed
- Headlights that brighten when the engine is revved
- Battery flat after a few days of short trips
- Whine or rumble that rises with electrical load
- Burning smell from the alternator after a long drive
Check the belt first, then the battery earth, then the B+ cable. A slipping belt or a corroded earth produces the same dim-light symptom as a failing alternator and costs far less to fix.
Pre-Fit Checklist
- Battery state of charge and age
- Condition of the B+ cable and its fuse
- Pulley type: solid, clutch or overrunning
- Mounting ear dimensions against the bracket
- Belt routing after the new unit is fitted
A new alternator on a tired battery or a glazed belt will not restore charging. Test the simple items before the unit goes on.
Fitting Guidance
Disconnect the battery negative terminal first, then release the belt tension and slip the belt off the pulley. Remove the B+ cable and the regulator plug before the mounting bolts.
Fit the replacement, reconnect the plug and B+ cable, then refit the belt and set tension to specification. Start the engine and confirm charging voltage at idle before the first drive.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Every batch is inspected for housing dimensions, pulley alignment and terminal integrity, and each unit is bench tested for output, ripple and regulator cut-in before it is boxed in neutral cartons with foam protection.
Standard references are kept as spot goods, volume orders are delivered in around 30 days and each alternator carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Why does the battery light glow at idle?
Usually a worn regulator, a slipping belt or a diode fault. Check belt tension and charging voltage before replacing the unit.
Can a bad alternator damage the battery?
Overcharging or heavy ripple will shorten battery life, and a deeply discharged battery can fail. Replace the alternator before the battery if voltage is out of range.
Can I replace the regulator only?
Yes, when the bearings and diodes are sound. On a high-mileage unit the complete alternator is usually better value.
What charging voltage should I see?
Around 13.8 to 14.7V at idle on a 12V system, and about 27.5 to 28.5V on a 24V system, measured at the battery posts.

