|
Type :
|
AIternator
|
|
Specification :
|
28v 35A
|
|
Pulley :
|
1PK
|
|
Brand :
|
nuojin
|
|
Number :
|
JFWZ29
|
|
Quality :
|
Regeneration
|
|
Delivery time :
|
10DAY
|
The installation method of the Foton 28V generator is similar to that of general generators, with specific steps as follows:
Inspect the generator: Carefully check if the generator is damaged and if all components are complete.
Inspect the mounting base: Ensure the mounting base is flat, firm, and has sufficient load-bearing capacity.
Place the generator: Carefully lift the generator onto the mounting base and align it with the original mounting holes. For large and heavy generators, lifting tools can be used for placement.
Secure the generator: Fix the generator to the base with bolts and tighten them with a wrench to ensure the generator is firmly secured and prevents movement during operation.
Install auxiliary components: Reinstall auxiliary components such as the cooling fan and protective cover in their original positions and fix them with screws or buckles.
Connect oil pipes (for fuel generators): Connect the oil pipes back to their original positions, fasten the clips, and ensure adequate fuel supply without leakage.
Connect wires: The 28V generator is usually a silicon rectifier generator. Connect terminal B to the positive electrode, terminal E to the negative electrode of the ground wire, terminal D+ to the charging indicator light (one end connected to the positive electrode of the key via a 3W instrument bulb, and the other end to D+), terminal N (neutral wire) is generally not connected, and terminal W to the engine tachometer. When connecting wires, accurately connect each wire according to the correct wiring positions, then tighten the screws to ensure a firm connection.
Inspect connection parts: After all installations are completed, carefully check all connection parts, including bolts, oil pipes, and wires, for looseness.
Conduct testing: After confirmation, power on the generator (for fuel generators, add fuel first) for a simple test. Observe if the generator can work normally and if the voltage and current output are stable.
Disconnect the power supply before installation. For fuel generators, close the fuel valve to avoid electric shock or fuel leakage risks.
Wear protective equipment such as insulating gloves and safety goggles during operation to prevent mechanical injuries or electrical accidents.
Do not install in humid, flammable or explosive environments. Ensure the installation area is well-ventilated.
Tighten the generator fixing bolts to the specified torque to prevent loosening due to vibration during operation.
Wires must be connected to the correct interfaces. Incorrect wiring of terminals such as B, E, and D+ will burn out the generator or electrical equipment.
Conduct a pressure test after connecting the oil pipes. Start the equipment only after confirming no fuel leakage.
Avoid collision with the generator shell and internal components during installation to prevent damage to core elements such as the rectifier and stator.
Ensure the cooling fan and protective cover are properly installed to keep the heat dissipation channel unobstructed and avoid generator overheating.
Run the generator under no-load condition for 5-10 minutes after the first start-up post-installation. Operate with load only after confirming no abnormalities.
Record the installation date and wiring method to facilitate subsequent maintenance and troubleshooting.
Regularly check the tightness of bolts, the status of wire connections, and the sealing of fuel pipelines. Handle problems promptly if found.
References：There is no clear source information for this text. It may be comprehensively compiled based on relevant installation manuals, technical data of the Foton 28V generator, and common precautions for generator installation. However, from the perspective of professionality and pertinence of the content, some of its points are consistent with those in some generator technical service guides. For example, the "Generator Technical Service Guide" on Renren Document Library mentions precautions such as generator mounting bolt torque, wiring requirements, and heat dissipation, but it cannot be confirmed that the text provided by the user is directly derived from this document.
Related Articles
Discover what vehicles use auto starter systems and how Auto Starter car technology improves safety, convenience, and performance. Learn about manufacturer production, factory supply, and modern applications for cars, trucks, and commercial vehicles.....
Looking for a complete Auto Starter guide? This article explains how auto starters work, types, symptoms, maintenance tips, and how manufacturers and factories supply high-quality starters for global production and bulk orders.....
Learn everything about starter parts, how they work, signs of failure, maintenance tips, and how a professional manufacturer with factory production ensures stable, high-quality starter components for global vehicle owners.....
Explore the real-world Auto Starter disadvantages in industrial and automotive production. Learn how auto starter systems affect reliability, cost, maintenance, and factory manufacturing efficiency.....
Discover what a starter solenoid does in a vehicle, how it works with the starter motor, signs of failure, and why quality starter solenoid production from a professional manufacturer and factory matters for reliable performance.....
Explore common Boat Starter types and learn which marine engines they fit best. As a professional Boat Starter manufacturer with factory production and bulk supply capability, we provide reliable starting solutions for outboard, inboard, and diesel marine engin....
