
12V 180A Alternator 68417025AA for 2022-2026 Chrysler Pacifica
Applicable models:2022-2026 Chrysler Pacifica
Reference part number:68417025AA 0126312185 14026 4A0953050 68417025aa 86887577 700510776 0126312185 SL5003 95459513 RAD34976 K057765N00 7G9T14B533AD PCD11622 EIS-2822192 4819239 1EF 354 533-011 321A 98521 2277483 2079086 GRHO01 ELG5650 10115841 20573 VWN3CA-6722-AA VAG025121 WG2360178 WG1493224 MB946603 30Z9383-0Y0 CH13075 4501-0019-SX 03.80699 0215419 MT1878 3350 6862725 AZMT-42-051-1086 ST0825 13313296 KBP1938 05005441AD 430807 8069889 6025171456 WG1792172
| Rated output : | 12V180A |
| Pulley : | 6PK |
| Size : | |
| Weight : | Net weight: 7.15kg |
| Packaging : | Neutral kraft paper packaging |
| Spot/Pre sale : | Spot goods |
| Warranty : | 1 year |
| Product number : |
| Type : | Alternator |
| Specification : | 12V180A |
| Pulley : | 6PK |
| Brand : | NUOJIN |
| Number : | 0126312185 |
| Quality : | NEW |
| Delivery time : | 30 days |







Overview of the 68417025AA Alternator
This 68417025AA alternator is the 12V, 180A replacement for 2022-2026 Chrysler Pacifica applications. The housing, pivot points and B+ terminal follow the original design, which means the unit drops into the existing bracket and reuses the factory belt.
Heat is the main enemy. The alternator sits in the airflow but also next to the exhaust manifold, and the diodes and regulator are the first parts to suffer when the under-bonnet temperature climbs.
Electrical Specification
- Rated voltage: 12V
- Rated output: 180 A
- Pulley: 6-groove PK
- Regulator: integrated, machine sensed
- Application: 2022-2026 Chrysler Pacifica
- Net weight: approximately 7.15 kg
- Condition: new, direct replacement for the original unit
The 12V, 180A rating is the output the unit holds at normal engine speed with the battery in a partially discharged state — the condition that matters in real use, not on a test bench.
Reference Numbers and Cross References
The OEM and aftermarket references listed for this alternator are:
- 0126312185
- 68417025AA
- 4A0953050
- 86887577
- 700510776
- SL5003
- 95459513
- RAD34976
- K057765N00
- 7G9T14B533AD
- PCD11622
- EIS-2822192
- 533-011
- 2277483
- GRHO01
- ELG5650
Where the label on the old unit has faded, compare the pulley groove count, the mounting ears and the plug shape with the photographs before ordering. This unit is listed with 16 references in total.
Fitment and Application
This alternator family was fitted across a range of the manufacturer applications as engines and electrical loads were revised. The unit here covers the references above and is a direct replacement where those numbers match.
If the number on the old alternator falls outside the list above, send the engine code and a photograph of the rear cover before ordering. A unit with the right housing but a different regulator plug will not connect cleanly.
Failure Patterns
Oil mist from a leaking cam or crank seal attacks the internal insulation. A unit that is oily on the outside is often already failing inside, even if the output still looks normal on a meter.
The regulator controls field current and therefore output voltage. Its brushes ride on the slip rings, and both wear. A worn regulator shows up as a charging voltage that drifts or flickers with engine speed.
Diagnostic Signs
- Battery light on with the engine running
- Dim or pulsing interior lights
- Voltage at the battery below 13.5V with the engine idling
- Belt squeal that appears when a heavy load switches on
- Overheating alternator body after a short run
Check the belt first, then the battery earth, then the B+ cable. A slipping belt or a corroded earth produces the same dim-light symptom as a failing alternator and costs far less to fix.
What to Check Before Fitting
- Battery state of charge and age
- Condition of the B+ cable and its fuse
- Pulley type: solid, clutch or overrunning
- Mounting ear dimensions against the bracket
- Belt routing after the new unit is fitted
A new alternator on a tired battery or a glazed belt will not restore charging. Test the simple items before the unit goes on.
Fitting the Replacement
With the battery isolated, relieve the belt tension, disconnect the B+ terminal and unplug the regulator connector, then remove the mounting bolts and lift the unit out.
Refit the belt and check alignment, reconnect the terminals and confirm charging voltage at idle and at 2000 rpm. Re-check belt tension after the first heat cycle.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Every batch is inspected for housing dimensions, pulley alignment and terminal integrity, and each unit is bench tested for output, ripple and regulator cut-in before it is boxed in neutral cartons with foam protection.
Standard references are kept as spot goods, volume orders are delivered in around 30 days and each alternator carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Can a bad alternator damage the battery?
Overcharging or heavy ripple will shorten battery life, and a deeply discharged battery can fail. Replace the alternator before the battery if voltage is out of range.
Can I replace the regulator only?
Yes, when the bearings and diodes are sound. On a high-mileage unit the complete alternator is usually better value.
Does the alternator come with a pulley?
Yes, the unit is supplied with its pulley fitted as shown in the photographs, so the original belt can be reused.
What charging voltage should I see?
Around 13.8 to 14.7V at idle on a 12V system, and about 27.5 to 28.5V on a 24V system, measured at the battery posts.

