
12V 160A Alternator 11383N for CHRYSLER
Applicable models:CHRYSLER
Reference part number:04896805AD 04896805AE 421000-0620 421000-0621 DRA2064 11383 04896805AD 04896805AE 11383 11383N 11383R 20132905 2040509 27-7756 421000-0620 421000-0621 553948 835.955.160 90-29-5718 K04896805AE LRA04147 LRA4147 A-80380 ALN5622 ALT30486 CAL40509 CAL40509AS CAL40509ES CAL40509GS CAL40509OS CAL40509RS UD15386A DA3174 DRA2064
| Rated output : | 12V 160A |
| Pulley : | 6PK |
| Size : | |
| Weight : | 净重5.65KG |
| Packaging : | Neutral kraft paper packaging |
| Spot/Pre sale : | Spot goods |
| Warranty : | 1 year |
| Product number : |
| Type : | Alternator |
| Specification : | 12V 160A |
| Pulley : | 6PK |
| Brand : | NUOJIN |
| Number : | 11383N |
| Quality : | NEW |
| Delivery time : | 30 days |





Overview of the 11383N Alternator
The 11383N alternator is a 12V, 160A unit built for CHRYSLER. It replaces the original assembly with the same mounting points, pulley offset and terminal layout, so the belt lines up and the existing wiring plugs in without modification.
Charging output depends on rotational speed and on the electrical load. A unit that produces 14.2V at idle with the lights off can still be marginal when the fan, lights and rear demister are all running, which is why a load test matters more than a no-load voltage reading.
Specification Summary
- Rated voltage: 12V
- Rated output: 160 A
- Pulley: 6-groove PK
- Regulator: integrated, machine sensed
- Application: CHRYSLER
- Net weight: approximately 5.65 kg
- Condition: new, direct replacement for the original unit
The 12V, 160A rating is the output the unit holds at normal engine speed with the battery in a partially discharged state — the condition that matters in real use, not on a test bench.
Reference Numbers and Cross References
Cross references for this unit are listed below; use them as a matching aid rather than a substitute for checking the number on the old alternator:
- 11383N
- 04896805AD
- 04896805AE
- 421000-0620
- 421000-0621
- 11383R
- 27-7756
- 553948
- 835.955.160
- 90-29-5718
- K04896805AE
- LRA04147
- LRA4147
- A-80380
- ALN5622
- ALT30486
Where the label on the old unit has faded, compare the pulley groove count, the mounting ears and the plug shape with the photographs before ordering. This unit is listed with 16 references in total.
Fitment and Application
CHRYSLER models in this range share the same mounting bracket and belt layout, which is why one reference serves several years of production. Fitment is decided by the number on the unit, not by the model year alone.
Vehicles that have had an engine or accessory drive belt conversion may already carry a different alternator, so treat the catalogue as a starting point rather than the final answer.
Common Failure Modes
The regulator controls field current and therefore output voltage. Its brushes ride on the slip rings, and both wear. A worn regulator shows up as a charging voltage that drifts or flickers with engine speed.
The diode rectifier is usually the first casualty. Six diodes convert the AC output to DC, and when one fails the alternator still charges but with a ripple that upsets the battery and the vehicle electronics.
What to Look For
- Slow cranking that gets worse each morning
- Dash lights that flicker at idle
- Radio interference or a hum through the speakers
- Alternator hot to the touch after a normal drive
- Charging voltage above 15V, boiling the battery
Measure charging voltage at the battery posts with the engine idling and all accessories off. A healthy unit holds about 13.8 to 14.7V on a 12V system; below 13.2V or above 15V points to the alternator or its regulator rather than the battery.
Checks Before Installation
- Battery condition and earth strap
- Belt condition, alignment and tensioner travel
- Pulley groove count against the original unit
- Regulator plug shape and B+ terminal size
- Charging voltage after fitting, at idle and at 2000 rpm
A new alternator on a tired battery or a glazed belt will not restore charging. Test the simple items before the unit goes on.
Installation Notes
With the battery isolated, relieve the belt tension, disconnect the B+ terminal and unplug the regulator connector, then remove the mounting bolts and lift the unit out.
Refit the belt and check alignment, reconnect the terminals and confirm charging voltage at idle and at 2000 rpm. Re-check belt tension after the first heat cycle.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Every batch is inspected for housing dimensions, pulley alignment and terminal integrity, and each unit is bench tested for output, ripple and regulator cut-in before it is boxed in neutral cartons with foam protection.
Standard references are kept as spot goods, volume orders are delivered in around 30 days and each alternator carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Why does the battery light glow at idle?
Usually a worn regulator, a slipping belt or a diode fault. Check belt tension and charging voltage before replacing the unit.
Can a bad alternator damage the battery?
Overcharging or heavy ripple will shorten battery life, and a deeply discharged battery can fail. Replace the alternator before the battery if voltage is out of range.
Can I replace the regulator only?
Yes, when the bearings and diodes are sound. On a high-mileage unit the complete alternator is usually better value.
Does the alternator come with a pulley?
Yes, the unit is supplied with its pulley fitted as shown in the photographs, so the original belt can be reused.

